Description
Tapout Tuning leads the way once again in bringing the aftermarket parts you want into reality. You can pre-order now, and reserve your spot for the first production run. There will be five part numbers initially, with production starting in July and shipments in August.
These pre-orders we will be shipping by date of order (i.e. first in, first out). Carbon fiber still needs to be sourced, so production of four additional part numbers will most likely be two to three months later.
All of these kits will still allow you to retain your active exhaust valves. You will need to cut your factory exhaust near the muffler to install this Double X Pipe.
Special thanks to @stevenicholson6 for the close-up pictures of his Blackwing!
Important Installation Tips:
- The valves should be in the open position before removing the stock exhaust to ensure the new valve on our systems hooks up to the actuator and no CEL . With the valves being closed before exhaust removal the car would not be able to learn valve position after the new valve is installed.
- Make sure not to accidentally flip Left and Right valves during installation. If you do, the ECM won’t get expected position when car is turned back on
- Make sure to not manually move the valves by accident when disconnected. If that happens, the computer won’t see expected position when car is turned back on.
Engineered and manufactured in Berea, OH, CORSA Performance exhaust systems come with the assurance of a Lifetime Warranty, embodying our commitment to uncompromising quality and performance. VIEW WARRANTY
Reviews
There are no reviews yet.